|
|
 |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
Click here to view Architectural Product Specification.
PVC MSDS
 View PDF
View Text |
|
| Specifications: |
|
 |
|
- PAVE EDGE is made from Poly Vinyl Chloride (PVC) a structural plastic product.
- PAVE EDGE RIGID PVC edging, straight one-piece section, with pre-drilled holes every 12" for spiking. (Designed for 6cm-8cm pavers.) Available in 10 ft. long sections or 7.5 ft. long sections
- PAVE EDGE FLEXIBLE PVC edging, pre-assembled two-piece flexible with predrilled holes. (Designed for 6cm-8cm pavers.) Available in 10 ft. long sections or 7.5 ft. long sections
- PAVE EDGE INDUSTRIAL edging, 10 ft. long, straight one-piece section, with pre-drilled, holes 6" apart alternating backside/front extension lip. (Designed for 8cm-10cm commercial / industrial pavements.)
- Connector Pipe for PAVE EDGE RIGID & FLEXIBLE is pre-cut and shipped one pipe per section. Connector Pipe for INDUSTRIAL is larger to accommodate industrial usage and is shipped one long piece per carton of 120 feet to allow for custom fitting.
- Storage of all components shall be in a flat location out of direct sunlight. Cartons should be covered against rain.
- PAVE EDGE HI-VIZ edging for trade shows and inside display. The bright yellow coloring enables HI-VIZ to be an effective warning and transition strip from the floor to the displayed pavers to reduce the likelihood of tripping.
|
|
 |
|
| Architectural Product Specification |
|
| View PDF |
|
| View Text |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
