|
SECTION I - PRODUCT IDENTIFICATION
Manufacturer's Name: PAVE TECH, INC.
P.O. Box 576
Prior Lake, Minnesota 55372
Phone: (952) 226-6400
Fax: (952) 226-6406
Toll Free 800-728-3832
Website: www.pavetech.com
Name: SILOXAGUARD
Class: 55
CAS No.: mixture
UN No.: 64-17-5
SECTION II - HAZARDOUS INGREDIENTS
Ethyl Alcohol: 1-10%
SECTION III - PHYSICAL DATA
VOC: 251 g/L
APPEARANCE AND ODOR: Milky white, amonia odor
BOILING POINT: 100°C
VAPOR DENSITY: Heavier than Air
SOLUBILITY IN WATER: Dilutable
Water Reactive: Not reactive
SPECIFIC GRAVITY: 1.03
SECTION IV - FIRE AND EXPLOSION HAZARD DATA
FLASH POINT: Does not flash
EXTINGUISHING MEDIA: Carbon Dioxide, dry chemical, or water
UNUSUAL FIRE AND EXPLOSIVE HAZARDS: Not considered a fire hazard when involved in a fire. Does not contribute to any unusual hazards.
SECTION V - HEALTH HAZARD DATA
Possible routes of entry: Inhalation
Acute and Chronic Overexposure:
Skin: no skin irritation is expected.
Eyes: mildly irritating to the eyes.
Breathing: mist may cause mild irritation to upper respiratory tract.
Ingestion: non known.
First Aid Procedures
Eye Contact: Immediately flush with clear water for 15 minutes.
Seek additional medical treatment.
Skin Contact: Wash with soap and water. See a physician if irritation occurs.
Inhalation (Breathing): Remove to fresh air
Ingestion (Swallowing): Do not induce vomiting. Dilute contents of stomach with 3-4 glasses of milk or water. Contact a physician.
SECTION VI - REACTIVITY DATA
Stability: Stable
Conditions to Avoid: None known
Incompatibility: (Materials to avoid) Bases, acids, and oxidizers
Hazardous Polymerization: None anticipated
Hazardous Decomposition Products: Carbon monoxide and carbon dioxide
SECTION VII - SPILL OR LEAK PROCEDURES
RELEASE OR SPILL:
• Ventilate area, absorb with absorbent material, and place in proper waste disposal containers
WASTE DISPOSAL:
• Disposal in accordance with local, state, and federal regulations.
SECTION VIII - SPECIAL PROTECTION INFORMATION
Ensure adequate ventilation. Wear water resistant rubber gloves, and chemical splash goggles. Mechanical exhaust is recommended. Positive pressure in interior of occupied buildings during exterior application. Wear impervious clothing and boots. Wash thoroughly with soap and water after using this product.
| 
