Landscaping Stones, Bricks, Retaining Walls, Walkways and Sidewalk Construction Equipment

Tools and Equipment

BRIGHTS Hardscape Lighting

Hardscape Edge Newsletter

Installation Guides & Tools

Hardscape Tech Support

Paver Installation - School for Advanced Segmental Paving

Tell a Friend | Print Page

TECHNICAL DATA

TYPE 1 FLEXIBLE,TYPE 2 BASICBOND, TYPE 3 SUPERWET and TYPE 4 ULTRAWET

	TYPE1 Flexible		TYPE2 BasicBOND		TYPE3 SuperWET	TYPE4 UltraWET
Application Range	45 to 120 degrees		30 to 110 degrees		32 to 110 degrees	10-120 degrees
Application Surface	Dry		Dry		Wet or Dry (Best if some moisture present)	Wet or Dry
Toxicity	Non Toxic after full cure		Non Toxic after full cure		Non Toxic	Non Toxic
VOC	349 gr/ltr		29 gr/ltr		0 gr/ltr	9 gr/ltr
Cure Time: Tack-Free	60 Minutes		30 Minutes		30 Minutes	30 Minutes
Cure Time: Firm	2-4 days		10 hours		4 hours	12 Hours
Cure Time: Complete	1-2 weeks		24 hours		24 hours	24 Hours

Adhesion180 degree peel Dry Peel*lbs./linear inch
	TYPE1 Flexible		TYPE2 BasicBOND		TYPE3 SuperWET	TYPE4 UltraWET
Brick	24		20		32	NA
Ceramic Tile	40+		31		30	NA
Concrete***	42		30		40	NA
Glass	23		21		33	NA
Wet Peel**lbs./linear inch
Brick	21		20		32	NA
Ceramic Tile	36+		31		30	NA
Concrete***	34		30		40	20
Glass	13		21		33	15
*Ultimate adhesive strength obtained in 3-6 weeks, depending on bead size, temperature and humidity.
**Dry Peel is performed after 1 month cure. Wet peel is 1 month followed by 7 days under water.
***Indicates failure of wire mesh to pull sample-actual values are higher.

Download PDF Brochure


© Copyright PAVE TECH, INC. Privacy Policy \| Legal Notice \| Support	Site by Clearimaging.com